Linkedin Autodesk Inventor Assessment Test Answers 2023

linkedin-autodesk-inventor-assessment-test-answers

This is all the answers to the Linkedin Autodesk Inventor Assessment Test, 2023. It has all the answers to the questions asked in the assessment test. All the answers are correct. If you need any assessment answers on LinkedIn marketplace, you can use these answer keys for the answer keys.

The Linkedin Autodesk Inventor Assessment test is a test that was created by LinkedIn. The test is designed to analyze your skill set and abilities as an inventor. This test has many different questions that test your knowledge on a wide array of topics. The test is about your inventor skills. You cannot pass or fail the test. You simply get an accurate assessment of what your inventor skills are. This blog post is going to answer all the questions from the Linkedin Autodesk Inventor Assessment Test.

This blog is focused on the LinkedIn Autodesk Inventor Assessment Test answers. The first thing that you need to know is that the responses are 100% correct. So if you need to know answers, you can find them here.

Linkedin Autodesk Inventor Assessment Test Answers 2023

Q.1 Given the geometry shown, what is most likely the next modeling feature to be created?


  1. Revolve

  2. Loft

  3. sweep

  4. Extrude



Q.2 What is the purpose of assembly constraints?


  1. to define the maximum bounds, or envelope, of an assembly

  2. to define limits as to how large an assembly can become

  3. to position or restrict motion of items in an assembly

  4. to limit how an assembly can be shared with collaborators


Q.3 What type of constraint, other than Transitional, can you apply between these parts to cause the red part to slide along the curved face of the blue model?


  1. Slider

  2. Mate

  3. Tangent

  4. Roller


Q.4 What is the purpose of a detail view in a drawing?


  1. A detail view is required to drive bill of materials (BOM) information.

  2. A detail view contains the material information for models in the design.

  3. A detail view creates a portion of the parent view at a larger scale.

  4. A detail view cuts through the part and exposes the design's inner workings.


Q.5 In the image below, which Ul element is highlighted with a red box?


  1. Explorer

  2. browser

  3. Map

  4. Finder


Q.6 The model shown is an example of what type of part?


  1. mechanical

  2. sheet metal

  3. plastic

  4. Consumer


Q.7 How can you share a 3D design with someone who doesn't have Inventor?


  1. Select the items you want to share, and then on the Assemble tab, select Shrinkwrap from the Simplification panel.

  2. Select the items you want to share, and then on the Tools tab, select Package Components from the Export panel.

  3. Click File > Share and then select DWF or 3D PDF

  4. Click File > Export and then select DWF or 3D PDF.


Q.8 What is the purpose of the origin geometry?


  1. to control positioning for modeling features

  2. to control all joints in an assembly

  3. to provide a fixed reference for any part or assembly in 3D space

  4. to link multiple parts together in an assembly


Q.9 What modeling feature would you use to turn the profile on the left into the solid on the right?


  1. Extrude

  2. Loft

  3. Revolve

  4. Sweep


Q.10 How few components could you use to create this assembly?


  1. eight

  2. Seven

  3. Five

  4. four



Q.11 What type of file is open in the image shown?

.


  1. assembly file

  2. drawing file

  3. simulation file

  4. part file


Q.12 What feature can create three spokes from one original spoke?


  1. Radial Pattern

  2. Spoke

  3. Circular Pattern

  4. Revolve


Q.13 How can you get a model to appear like the one in this image?


  1. Navigate to the Tools tab and, in the Appearance panel, turn on the Illustration option.

  2. Right click in the graphics window and select Enable Hidden Lines.

  3. Navigate to the View tab and, in the Visibility panel, turn on the Hidden Lines option.

  4. Navigate to the View tab and, from the Visual styles menu, select Wireframe with Hidden Edges.


Q.14 If the browser gets closed by mistake, how can you turn it back on?


  1. Close and restart Inventor. The browser will return to its previous location.

  2. Right-click in the graphics window and select Browser from the UI Display menu.

  3. Hover the cursor near the left side of the screen until you see the green highlight, then right-click and select Enable Browser.

  4. From the View tab, click User Interface and select Browser.


Q.15 When an assembly is placed inside another assembly, what does it become?


  1. a mini assembly

  2. a consumed assembly

  3. a subassembly

  4. a nested assembly


Q.16 What does the purple color of the Paint icon in the browser indicate?


  1. The part is a reference component.

  2. The part is not visible in the graphics window.

  3. The part is missing from the hard drive.

  4. The part is a virtual component.


Q.17 During the design process, you often need to ensure parts don't intersect with one another. What tool would you use to determine whether adjacent areas are problematic?


  1. Simulate Interference

  2. Detect Collision

  3. Analyze Interference

  4. Contact Set



Conclusion:

Hi dear reader, do you need any Assessment Answers on LinkedIn Marketplace? If so, you came to the right place. Here we'll give you the answers. It's 100% right.

We hope you enjoyed our article on the Linkedin Autodesk Inventor Assessment Test Answers 2023. If you need some professional assessment answers or know someone who does, then you have come to the right place! The questions and answers for the test are provided to you for free. Please keep in mind that the questions presented on the test are not the same as the questions and answers found on the assessment. We would love to hear from you if you have any questions or comments by visiting ___. Thank you, and good luck on your interview!

Related searches:

  • linkedin assessment quiz answers
  • linkedin assessment answers 2022
  • linkedin assessment answers 2023
  • linkedin assessment answers 2021
  • linkedin assessment answers github
  • autodesk fusion 360 linkedin assessment answers
  • linkedin skill quiz answers quizlet
  • linkedin skill assessment answers reddit

Related post: